A standard
of AIDI

Data news

What an IGI lab-grown diamond report lists and what a GDCS certificate adds

A side-by-side reading of an archived IGI sample report and the GDCS specimen shows where 4C grading sits on each document and where sustainability information appears.

An archived IGI laboratory-grown diamond report, taken from IGI's own report server, sets out the grading record for a single stone. It lists the report number, the shape and cutting style, the measurements and the carat weight. It then gives the colour, clarity and cut grades, followed by polish, symmetry and fluorescence. It also records the inscription that ties the physical stone to the report, so that a given diamond can be matched to its paperwork.

The same archived sample report carries no sustainability information. Its fields describe the stone as a graded gem: its dimensions, its weight, its optical and finishing qualities, and its identifying inscription. For confirmation that a report is genuine, the document directs readers to IGI's website to verify it. Verification of an IGI report therefore runs through IGI's own channel.

GDCS documents describe IGI as strong at grading stones, and they state that GDCS does not claim more than it can on 4C grading. On a GDCS certificate, the 4C is not graded by GDCS itself. It is tested and graded by a laboratory of the GDCS Laboratory Alliance, and the certificate names that laboratory and gives its report number. A reader can see which laboratory produced the grading and which report it comes from.

Alongside the 4C, the GDCS certificate adds a sustainability grade. That grade is set out in 5 dimensions, and each dimension is marked with where its data comes from. The certificate keeps the stone's gem grading and its sustainability grading as separate parts of one document, with the source of each sustainability input shown next to it rather than folded into a single unexplained figure.

The GDCS specimen used for this comparison is a sample sheet, not a certified stone. It shows the layout and the fields of a certificate, but it does not describe a real diamond that has been through certification. Until the GDCS grading rules are published, the grade and the weights on the specimen read to be published. The specimen therefore shows what a certificate will contain, not how any particular stone scores.

Verification also works differently. A GDCS certificate is checked at its own verification page by its certificate number. That page shows whether the certificate is still valid, so the status of a certificate can be confirmed at the time it is checked, not only at the time it was issued.

Sources

  • https://pdf.igi.org/ID650484028.pdf · archived 2026-10-22 · SHA-256 56ee7bd39863d9f4335414efd0ec4059bc3a3fbb975ce2946f0d6548caea17b3
  • GDCS records
  • GDCS certificate introduction (GDCS)

What this article does not say

  • This article does not compare the accuracy or quality of 4C grading between any laboratories.
  • The GDCS specimen does not show any real sustainability grade or weighting, since these read to be published until the grading rules are.
  • This article does not describe the content of the 5 sustainability dimensions or how they are scored.
  • This article does not claim that IGI reports are incomplete for their purpose as grading reports.

How to cite

GDCS Data Desk. (2026). What an IGI lab-grown diamond report lists and what a GDCS certificate adds. GDCS.AI, 25 October 2026. https://gdcs.ai/news/2026-10-25-igi-report-and-gdcs-certificate/